Rivets & Eyelets

Hockey skate manufacturers use rivets to hold the skate blade holder onto the skate boot. During skating, the force applied loosens the rivets. Additionally, rust and corrosion can affect rivets. The good news is these rivets can be replaced. Blademaster sells all the equipment you need to replace rivets.

Steel or Copper?

There are two primary types of rivets used on hockey skates – copper and steel.

COPPER rivets are usually reserved for the high-torque areas of the blade holder. They tend to be stronger and can withstand greater forces. Normally they are seen on the heel portion of the holder. However copper rivets tend to be more expensive.

STEEL rivets are usually used everywhere else on the skate holder.

Often the blending of BOTH copper and steel rivets is the optimal and most affordable solution.

Want to talk more about the best options for rivets? Contact our customer service department at guspro@guspro.com for more information.

Rivet Sizes

Please note: #9 rivets are thicker. #11 rivets are thinner.

Part ID Description Length # in Pkg
7111000CR COPPER RIVET 1 (25mm) #11 100/PKG
7111016SR STEEL RIVET 5/8 (16mm) 250/PKG
7111116SR STEEL RIVET 11/16 (18mm) 250/PKG
7111200CR COPPER RIVET 1-1/4 (31mm) #9 100/PKG
7111216SR STEEL RIVET 3/4 (19mm) 250/PKG
7111250CR COPPER RIVET 1-1/4 (31mm) #11 100/PKG
7111316SR STEEL RIVET 13/16 (21mm) 250/PKG
7111416SR STEEL RIVET 7/8 (22mm) 250/PKG
7111516SR STEEL RIVET 15/16 (24mm) 250/PKG
7111616SR STEEL RIVET 1 (25mm) 250/PKG
7112616SR STEEL RIVET 1-5/8 (41mm) 250/PKG
7112816SR STEEL RIVET 1-3/4 (44mm) 250/PKG
711416SR STEEL RIVET 1/4 (6mm) 250/PKG
711616SR STEEL RIVET 3/8 (10mm) 250/PKG
711716SR STEEL RIVET 7/16 (11mm) 250/PKG
711750CR COPPER RIVET 3/4 (19mm) #9 100/PKG
711816SR STEEL RIVET 1/2 (13mm) 250/PKG
711916SR STEEL RIVET 9/16 (14mm) 250/PKG

Eyelet Sizes

Part # Item ID OD Flange OD Length
711260EJKB Eyelet 0.272 0.300 0.516 0.274
711260EAAB Eyelet 0.198 0.225 0.385 0.204
711404B Eyelet & Washer 0.200 0.220 0.460 0.276
711404XL Eyelet & Washer 0.200 0.220 0.460 0.312
711XLA Eyelet 0.164 0.200 0.348 0.256
TSE260 Eyelet 0.220 0.247 0.385 0.290
TSE261 Eyelet 0.220 0.247 0.385 0.351
TSE262 Eyelet 0.220 0.247 0.385 0.375
TSE263 Eyelet 0.220 0.247 0.385 0.380
TSE264 Eyelet 0.220 0.247 0.385 0.410
TSE265 Eyelet 0.220 0.247 0.385 0.445
TSE266 Eyelet 0.220 0.247 0.385 0.480